(Please mouse-over any icon to get a description of that function).

Categories

• Show All Entries - (111)
• Research - (1)
- Logo

• Tools
• Workshop - (2)
- Practice Kit
- Workshop Area

• Tail Feathers - (83)
- Replaced Finished...
- Tail Tie Down
- IA progress inspection
- Counterweight
- Elevator Counterweight
- Riveting elevator...
- Riveting Elevator...
- Riveting Hinge...
- Riveting Hinge Halves
- Elevator Trailing Edge
- SB-00043
- SB-00043 more
- SB-00043
- Trim Tabs
- Riveting skins
- re-prime
- Trim tab trailing edges
- Begin prep for SB-00043
- Tip Ribs
- Tip Ribs LCP...
- Elevator Trim Tabs
- Elevator Assembly -...
- Back Riveting Ribs...
- Elevator Assembly
- Elevator and Trim...
- Prep and Alodine...
- Etch Prime Elevator...
- Trim Tab Horns
- Elevator Spars -...
- HS Finished!!
- Bottom Side HS
- HS final steps
- Bottom Skins
- Bottom Skins
- H Spar Rivering...
- Bottom and Top Skins
- Nose Ribs to Skin
- Elevator Parts...
- Elevator Gusset
- VS Nose Ribs and...
- Tip Ribs - Long Day
- Elevator Tip Ribs,...
- Elevator Ribs
- Elevator Ribs -...
- Assembling Front Spar
- Elevator
- Front Spar and Nose...
- Riveting Inspar Ribs...
- Epoxy Priming HS Parts
- Countersinking...
- New HS-1014 and...
- HS Alodine Parts
- HS Stringer Web and...
- Dimpling HS Parts
- HS Stringers,...
- More Riveting Progress
- Riveting HS Spars
- Alodine and Prime HS...
- Counterinking HS Spars
- HS Rib Mods and...
- Milling of HS Spars...
- Rudder Counterweight...
- Rudder Leading Edge
- Rudder Trailing Edge
- Rudder Assembly
- Rudder Innards Assembly
- Assembly of Vertical...
- Still on the road
- Back to Work
- Elevator Spar
- Rudder
- Rudder
- Finishing Up...
- Vertical Stabilizer...
- Vertical Stabilizer
- Rudder Stiffeners
- Rudder Stiffeners
- VS and Rudder
- Deburring Rudder Parts
- Short Night
- Vertical Stabilizer
- Riveting elevator...

• Empennage - (6)
- On the Road again
- Disassemble of tailcone
- Upper Rear Skin...
- Back from a three...
- More Empennage build
- Empennage Build

• Fuselage
• Firewall
• Wings - (2)
- LCP replacement Parts
- Wing Kit Inventory

• Controls
• Avionics
• Lighting
• Instrument Panel
• Landing Gear
• Engine
• Propeller
• Fuel System
• Interior Finish
• Paint / Decals - (2)
- Epoxy Prime Alodined...
- Paint Booth Completed

• Inspection
• Misc. - (14)
- Been on the road
- Van's Laser Drill...
- Van's Laser Drill...
- Oshkosh 2023
- Duramax LBZ all back...
- Still rebuilding LBZ
- Putting Engine back...
- Taking a break for a...
- In Europe for a...
- Back from OSH
- Conversion Coating
- Conversion Coating -...
- Alodine Work Area
- Inventory

• Mis-Steakz - (1)
- Mistakes in process...